A Redesign Procedure to Manufacture Adaptive Façades with Standard Products

  • Bahar Başarır Graduate School of Science Engineering and Technology, Istanbul Technical University
  • Cem Mehmet Altun Department of Architecture, Istanbul Technical University

Abstract

Although their potential for high environmental performance is largely accepted, adaptive façades have not yet become widespread in practice. Most of the current examples are developed by engineer-to-order design processes, as project-oriented, custom, and complex solutions. More simple and reliable solutions are needed to support the reuse of technical solutions between projects and increase the feasibility of adaptive façades. Therefore, this research aims to develop a procedure to design adaptive façades whose parts are based on engineered standard products with the least number of parts and layers. The research is initiated through the generation of concepts for designing adaptive façades to be manufactured using standard products. From several concepts, ‘redesigning dynamic adaptive façades’ has been selected for further investigation, as it pursues the goals for a solution determined for this research. A preliminary case study is conducted to redesign an adaptive façade to be manufactured with standard products. Its process steps are captured and analysed, and the steps that need improvement are revealed. To systematise and improve the captured redesign process, façade design and product design methodologies are analysed in the context of adaptive façade design. Redesign and reverse engineering processes used in product design are adapted and merged with façade and adaptive façade design processes, and a 5-phase adaptive façade redesign procedure is outlined. Each phase is developed based on mature tools and methods used in product and façade design. An iterative loop of development, application test, and review process is carried out for development of the process steps. Thus, a redesign procedure is generated by the combined application of DFMA and TRIZ in the synthesis of reverse engineering and redesign processes. Consequently, the application of the redesign procedure is demonstrated through a case study. The case study revealed that the procedure has the ability to generate a façade redesign that has a higher constructability index than the reference façade.

References

Abe, T., & Starr, P. (2003). Teaching the writing and role of specifications via a structured teardown process. Design Studies, 24(Common Ground), 475-489. doi:10.1016/S0142-694X(03)00037-1
Adams, S. (1989). Practical Buildability (CIRIA Building Design Report). London, UK: Butterworths -Heinemann Ltd
Allen, E. (1993). Architectural Detailing: Function, Constructability, Aesthetics. Hoboken, New Jersey: Wiley.
Anderson, D. M. (2014). Design for Manufacturability: How to Use Concurrent Engineering to Rapidly Develop Low-Cost, High-Quality Products for Lean Production. [N.p.]: Productivity Press.
ASCE. The Construction Management Committee, Construction Division (1991). Constructability and constructability programs: White paper. Journal of Construction Engineering and Management, 117(1), 67-89.
Attia S. (2017). Evaluation of adaptive facades: The case study of Al Bahr Towers in the UAE. QScience Connect, Shaping Qatar’s Sustainable Built Environment, 2 (6), 1-13 Retrieved from http://dx.doi.org/10.5339/connect.2017.qgbc.6
Attia, S., & Bashandy, H. (2016). Evaluation of adaptive facades: The case study of AGC Headquarter in Belgium. In eds. Belis, J. & Louter, C., Challenging Glass 5 -– Conference on Architectural and Structural Applications of Glass. Ghent, Belgium: Ghent University.
Attia, S., Favoino, F., Loonen, R.C.G.M., Petrovski, A., & Monge-Barrio, A. (2015). Adaptive facades system assessment: An initial review. 10th Conference on Advanced Building Skins, 3-4 November, 1265-1273, Bern, Switzerland.
Başarır, B., & Altun, M.C. (2017). A classification approach for adaptive façades. In Tavil, A., & Celik, O.C. (Eds.), ICBEST Istanbul: Interdisciplinary Perspectives for Future Building Envelopes, Istanbul, Turkey: Istanbul Technical University.
Boer, B. D., Ruijg, G., Loonen, R. R., Trcka, M. M., Hensen, J. J., & Kornaat, W. (2011). Climate adaptive building shells for the future – optimization with an inverse modelling approach. In Proceedings ECEEE Summer Study 2011, Belambra Presqu’île de Giens, France, June 2011, 1413-1422
Bolbroe, C. (2014). Adaptive Architecture. Non-Refereed Proceedings of the 2nd Media Architecture Biennale Conference: World Cities. pp:13-16. Aarhus, Denmark
Brock, L. (2005). Designing the Exterior Wall: An Architectural Guide To The Vertical Envelope. Hoboken, N.J: John Wiley.
Cantamessa M., & Montagna F. (2016). Design and redesign of product architecture. In: Management of Innovation and Product Development. London: Springer. doi:10.1007/978-1-4471-6723-5_16
Charles, J. A., Crane, F. A. A., & Furness J. A. G. (2001). Selection and Use Of Engineering Materials. Oxford: Butterworth-Heinemann
Chechurin, L., & Borgianni, Y. (2016). Understanding TRIZ through the review of top cited publications. Computers in Industry, 82119-134. doi:10.1016/j.compind.2016.06.002
Chen, Y., Peng, Q., & Gu, P. (2017). Methods and tools for the optimal adaptable design of open-architecture products. The International Journal Advanced Manufacturing Technology, (1-4), 991. doi:10.1007/s00170-017-0925-6
CII (1986). Constructability: A Primer. Austin, TX: Construction Industry Institute, University of Texas
CIRIA (1983). Buildability: An Assessment, Special Publication 26, London: Construction Industry Research and Information Association.
Dandy, G., Daniell, T., Foley, B., & Warner, R. (2018). Planning and Design of Engineering Systems. Boca Raton, FL: CRC Press
Dieter, G. E., & Schmidt, L. C. (2012). Engineering Design (5th ed.). New York: McGraw-Hill Higher Education.
DIN 8593 Manufacturing processes joining, Standard by Deutsches Institut Fur Normung E.V. (German National Standard), 09/01/2003
Dorst, K. (2004). On the problem of design problems - Problem solving and design expertise. Journal of Design Research, 4(2)
Eekhout, M. (2008). Methodology for Product Development in Architecture. NL: Ios Press
Emmitt, S., Olie, J., & Schmid, P. (2004). Principles of Architectural Detailing. Blackwell Publishing Ltd
Firesmith, D. (2015). Open System Architectures: When and Where to be Closed. Retrieved from https://insights.sei.cmu.edu/sei_blog/2015/10/open-system-architecture-when-and-where-to-be-closed.html
Fox, S., Marsh, L., & Cockerham, G. (2001). Design for manufacture: a strategy for successful application to buildings. Construction Management and Economics, 19(5), 493-502. doi:10.1080/01446190110044861
Gerth, R., Boqvist, A., Bjelkemyr, M., & Lindberg, B. (2013). Design for construction: utilizing production experiences in development. Construction Management and Economics, 31:2, 135-150. doi:10.1080/01446193.2012.756142
Gosztonyi, S. (2015). Adaptive Façade – which criteria are needed? In Pottgiesser, U., Hemmerling, M. & Böke, J. (Eds.), proceedings of Façade 2015 Computational Optimisation. Sweden, Europe: HS OWL, Detmolder Schule für Architektur und Innenarchitektur.
Gowri, K. (1990). Knowledge-based system approach to building envelope design (Doctoral dissertation). Concordia University. Available from: BASE, Ipswich, MA.
Han, Y. H., & Lee, K. (2006). A case-based framework for reuse of previous design concepts in conceptual synthesis of mechanisms. Computers in Industry, 57(4),305-318. doi:10.1016/j.compind.2005.09.005
Ichida, T., & Voigt, E. C. (1996). Product Design Review: A Method for Error-Free Product Development. Portland, Or: Productivity Press.
Jahan, A., Edwards K.L., & Bahraminasab, M. (2016). Multi-Criteria Decision Analysis For Supporting The Selection Of Engineering Materials In Product Design. Oxford, UK; Cambridge, MA: Butterworth-Heinemann, an imprint of Elsevier
Jensen, P. (2014). Configuration of platform architectures in construction (Doctoral dissertation). Sweden, Europe: Luleå tekniska universitet, Byggkonstruktion och -produktion
Jones, J. C. (1992). Design Methods (2. bs. ed.). New York: Van Nostrand Reinhold.
Juvinall, R. C., & Marshek K.M. (2012). Fundamentals of Machine Component Design. Hoboken, NJ: John Wiley & Sons.
Klein, T. (2013) Integral Facade Construction-Towards a new product architecture for curtain walls (Doctoral dissertation). Delft Technical University, Delft 2013.
Kolarevic, B. (2015). Towards architecture of change. In Kolarevic, B. & Parlac V. (Eds.), Building Dynamics: Exploring Architecture of Change,1-17, New York: Routledge
Koren, Y., Hu, S. J., Peihua G., & Shpitalni, M. (2013). Open-architecture products. CIRP Annals, 62(2), 719-729, ISSN 0007-8506
Lawson, B. R. (1970). Open and closed ended problem solving in architectural design. In Honikman (Eds.), 1971. A.P. 1970 Conference, London: RIBA
Leaney P. G., & Wittenberg, G. (1992). Design for assembling: The evaluation methods of Hitachi, Boothroyd and Lucas. Assembly Automation, 12(2), 8-17
Lefever, D. D., & Wood, K. L. (1996). Design for assembly techniques in reverse engineering and redesign. ASME Design Theory and Methodology Conference. Retrieved from https://www.sutd.edu.sg/cmsresource/idc/papers/1996-_Design_for_Assembly_Techniques_in_Reverse_Engineering_and_Redesign-DFA-sop_force_flow.pdf
Li, Z. S., Kou, F. H., Cheng, X. C., & Wang, T. (2006). Model-based product redesign. International Journal of Computer Science and Network Security, 6(1).
Liu, T.H., & Fischer, G.W. (1994). Assembly evaluation method for PDES/STEP-based mechanical systems. Journal of Design and Manufacture, 4, 1-19.
Loonen, R.C.G.M. (2013). Climate adaptive building shells. Retrieved from http://pinterest.com/CABSoverview/
Loonen, R.C.G.M., Favoino, F., Hensen, J.L.M., & Overend, M. (2017). Review of current status, requirements and opportunities for building performance simulation of adaptive facades. Journal of Building Performance Simulation, 10:2, 205-223
Loonen, R.C.G.M., Trcka, M., Cóstola, D., & Hensen J.L.M. (2013). Climate adaptive building shells: State-of-the-art and future challenges. Renewable and Sustainable Energy Reviews, 25, 483–493, doi:https://doi.org/10.1016/j.rser.2013.04.016
Loonen, R.C.G.M., Rico-Martinez J.M., Favoino F., Brzezicki, M., Menezo, C., La Ferla G., & Aelenei, L. (2015). Design for façade adaptability – Towards a unified and systematic characterization. Proc. 10th Energy Forum - Advanced Building Skins, Bern, Switzerland, 1274–84.
Lucchetta, G., Bariani, P. F., & Knight, W. A. (2005). Integrated design analysis for product simplification. CIRP Annals - Manufacturing Technology, 54(1), 147-150.
Mann, D., & Cathain, C. (2005). Using TRIZ in Architecture: First Steps. The Triz Journal, Retrieved from http://triz-journal.com/using-triz-architecture-first-steps/
Meagher, M. (2015). Designing for change: The poetic potential of responsive architecture. Frontiers of Architectural Research, 4(2), 159-165.
Molloy, O., Warman, E. A., & Tilley, S. (2012). Design for Manufacturing and Assembly: Concepts, architectures and implementation. Springer Science & Business Media.
Natee, S., Low, S. P., & Teo, E. A. (2016). Quality Function Deployment for Buildable and Sustainable Construction. Singapore: Springer.
O’Connor, J. T., Rusch, S. E., & Schulz, M. J. (1987), Constructability concepts for engineering and procurement. Journal of Construction Engineering and Management, 113(2), 235-248.
Ogwezi, B., Bonser, R., Cook, G, & Sakula, J. (2011). Multifunctional, Adaptable Facades. TSBE EngD Conference, TSBE Centre, University of Reading, Whiteknights, RG6 6AF, 5th July 2011.
Oliveira, L. A., & Melhado, S. B. (2011). Conceptual Model for the Integrated Design of Building Façades. Architectural Engineering & Design Management, 7(3), 190-204.
Ong, S. K., Nee, A. C., & Xu, Q. L. (2008). Design Reuse in Product Development Modeling, Analysis and Optimization. Hackensack, NJ: World Scientific.
Otto, K.N. & Wood, K. L. (1998) Product Evolution: A Reverse Engineering and Redesign Methodology. Research in Engineering Design 10(4), 226-243.
Pahl, G., Beitz, W., & Wallace, K. (1996). Engineering Design: A Systematic Approach. London: Springer.
Pedgley, O. (2007). Capturing and analysing own design activity. Design Studies, (5), 463.
Perino, M. & Serra, V. (2015). Switching from static to adaptable and dynamic building envelopes: A paradigm shift for the energy efficiency in buildings. Journal of Facade Design and Engineering, 3 (2), 143-163, doi:10.3233/FDE-150039
Roozenburg, N. F. M., & Eekels, J. (1995). Product design: Fundamentals and methods. Chichester: Wiley.
Schittich, C. (ed.), (2005). Schulungsgebäude in Unterschleißheim. DETAIL Zeitschrift für Architektur- Steel Construction, German/English Edition 2005(4), 325-330.
Schnädelbach, H. (2010). Adaptive Architecture – A Conceptual Framework, In proceedings of Geelhaar, J., Eckardt, F., Rudolf, B., Zierold, S, & Markert, M. (Eds.), MediaCity: Interaction of Architecture, Media and Social Phenomena, Weimar, Germany, 523-555
Schulungsgebäude in Unterschleißheim (2018, January). Retrieved 20 January 2018 from https://inspiration.detail.de/schulungsgebaeude-in-unterschleissheim-107778.html
Schumacher, M., Schaeffer, O., & Vogt, M. (2010). Move: Architecure In Motion-Dynamic Components and Elements. Basel; London: Birkhäuser.
Schwede, D., & Störl, E. (2016). System for the analysis and design for disassembly and recycling in the construction industry. Central Europe towards Sustainable Building Prague 2016 (CESB16)
Smith, R. E. (2010). Prefab architecture: a guide to modular design and construction. Hoboken, N.J.: John Wiley & Sons.
Smith, S., Smith, G., & Shen Y.T. (2012) Redesign for product innovation. Design Studies, 33 (2), 160-184, ISSN 0142-694X
Staib, G., Dörrhöfer, A., & Rosenthal, M. J. (2008). Components and systems: modular construction: design, structure, new technologies. München: Edition Detail, Institut für internationale Architektur-Dokumentation; Basel/Boston: Birkhäuser.
Struck C., Almeida M. G., Monteiro da Silva S., Mateus R., Lemarchand P., Petrovski A., … de Wit J. (2015) Adaptive facade systems – review of performance requirements, design approaches, use cases and market needs. 10th Conference on Advanced Building Skins, 3-4 November, 1254-1264, Bern, Switzerland.
Tatum, C. B. (1987). Improving constructability during conceptual planning, Journal of Construction Engineering and Management ASCE, 113(2), 191–207
Tomiyama, T., Gu, P., Jin, Y., Lutters, D., Kind, C., & Kimura, F. (2009). Design methodologies: Industrial and educational applications. CIRP Annals - Manufacturing Technology, 58(2), 543-565.
Tooley M.H., & Knovel (2010). Design Engineering Manual. (1st ed). Amsterdam; London; Boston: Butterworth-Heinemann.
Ulrich, K. T. (1992). The role of product architecture in manufacturing firm. Massachusetts Institute of Technology, Sloan School of Management.
Ulrich, K. T., & Eppinger, S. D. (2012). Product Design and Development (5th ed.). New York: McGraw-Hill/Irwin.
Vermaas, P. E. (2014). Design Theories, Models and Their Testing: On the Scientific Status of Design Research. In Chakrabarti A., & Blessing L. T. M. (Eds.), An Anthology of Theories and Models of Design. London: Springer
How to Cite
BAŞARIR, Bahar; ALTUN, Cem Mehmet. A Redesign Procedure to Manufacture Adaptive Façades with Standard Products. Journal of Facade Design and Engineering, [S.l.], v. 6, n. 3, p. 77-100, sep. 2018. ISSN 2213-3038. Available at: <https://journals.library.tudelft.nl/index.php/jfde/article/view/2530>. Date accessed: 16 dec. 2018. doi: https://doi.org/10.7480/jfde.2018.3.2530.
Published
2018-09-24