An analysis of the potential of envelope-integrated solar heating and cooling technologies for reducing energy consumption in European climates

  • Peru Elguezabal Tecnalia
  • Beñat Arregi TECNALIA Sustainable Construction Division,

Abstract

There is a clear trend towards the increased contribution of renewable energy at European level, and EU policies are oriented towards that direction. The building sector is no exception and presents an urgent necessity for increasing the share of renewable energy sources (RES) to reduce the impact on the environment.

The aim of this paper is to examine the potential of solar heating and cooling technologies in reducing energy consumption by incorporating solar thermal and PV collectors within the building’s envelope. Although generally envisaged to be integrated in the roof, preferably oriented to the south, this study explores also their potential for integration into the façades.

External climate influences both the demand for space heating and cooling (influenced by temperature) and the potential from solar renewable energy (incident global irradiation). However, a time lag exists since supply and demand peak at different times within the day as well as during the year.

This study assesses the interplay of solar energy supply with heating and cooling energy demand. An analysis is performed over climate data files for five European locations, based on daily weather data. Besides the extent of incident solar irradiation, its seasonal usability is assessed with regard to the thermal demand. The impact of the inclination of solar collector devices is assessed by comparing their placement on a horizontal plane, on the inclination of maximum exposure for each climate, and on vertical planes for the four cardinal directions.

As a conclusion, the utilization of solar energy for different scenarios is assessed and a discussion on the integration of solar thermal and PV collectors over façades is presented, building on the potential of these technologies for developing innovative solutions that could significantly upgrade the buildings’ energy performance in the near future.

References

UNEP - SBCI, United Nation’s Environment Programme’s Sustainable Building and Climate Initiative. (2009). Buildings and Climate Change. Summary for Decision – Makers. Retrieved from http://staging.unep.org/SBCI/pdfs/SBCI-BCCSummary.pdf

European Commission. (2017). Energy Strategy and Energy Union. Secure, competitive, and sustainable energy. Retrieved from https://ec.europa.eu/energy/en/topics/energy-strategy-and-energy-union

Directive 2010/31/EU, (2010), of the European Parliament and of the Council of 19 May 2010 on the energy performance of buildings (recast)

Commission Recommendation (EU) 2016/1318, (2016), of 29 July 2016 on guidelines for the promotion of nearly zero-energy buildings and best practices to ensure that, by 2020, all new buildings are nearly zero-energy buildings.

IEA. (2013). International Energy Agency. Transition to Sustainable Buildings. Strategies and Opportunities to 2050

Stanciu, C. & Stanciu, D. (2014). Optimum tilt angle for flat plate collectors all over the World – A declination dependence formula and comparisons of three solar radiation models. Energy Conversion and Management. Vol. 81 (2014), pp. 133-143

Munari Probst, M.C. & Roecker, C. (editors). (2012). Solar Energy Systems in Architecture – integration criteria and guidelines. IEA SHC Task 41, Subtask A

O’Hegarty, R., Kinnane, O. & McCormack, S. J. (2016). Review and analysis of solar thermal facades. Solar Energy. Vol. 135 (2016), pp. 408-422

Elguezabal, P. et al. (2018). Review of the European Dwelling Stock and its Potential for Retrofit Interventions Using Solar-Assisted Heating and Cooling. Conference proceedings. In REHABEND 2018, Cáceres, Spain. 15-17 May 2018

Meteonorm weather database. Meteotest. Retrieved from http://www.meteonorm.com

Schoenau, G. & Kehrig, R. (1990). Method for calculating degree-days to any base temperature. Energy & Buildings. Vol. 14, Issue 4 (1990), pp. 299–302

Perez, R. et al. (1998). The Development and Verification of the Perez Diffuse Radiation Model. Sandia Report SAND88-7030

IRENA. (2012). International Renewable Energy Agency. Renewable energy technologies. Cost analysis series. Volume 1: Power Sector Issue 4/5. Solar Photovoltaics

IRENA. (2017). International Renewable Energy Agency. Cost and competitiveness indicators. Rooftop solar PV

Winkler Solar. Retrieved from http://www.winklersolar.com (22/03/2018)

Elguezabal P., Garay R. & Martin K. (2017). Experimentation under real performing conditions of a highly integrable unglazed solar collector into a building façade. Energy Procedia. Vol. 122 (2017), pp. 775-780.

University of Stuttgart, IBK2. Retrieved from http://www.uni-stuttgart.de/ibk2/index.php (22/03/2018)

Cao, S., Hasan, & A., Sirén, K. (2013). On-site energy matching indices for buildings with energy conversion, storage and hybrid grid connections. Energy & Buildings, Vol. 64 (2013), pp. 423-438.
How to Cite
ELGUEZABAL, Peru; ARREGI, Beñat. An analysis of the potential of envelope-integrated solar heating and cooling technologies for reducing energy consumption in European climates. Journal of Facade Design and Engineering, [S.l.], v. 6, n. 2, p. 085-094, june 2018. ISSN 2213-3038. Available at: <https://journals.library.tudelft.nl/index.php/jfde/article/view/2102>. Date accessed: 20 june 2018. doi: https://doi.org/10.7480/jfde.2018.2.2102.
Published
2018-06-20