Abstract of: Calculation methods of glass parapets in aluminium clamping profiles

  • Youri Baidjoe Eindhoven University of Technology, Eindhoven
  • Bert Van Lancker Department of Structural Engineering, Ghent University
  • Jan Belis Department of Structural Engineering, Ghent University / Structural Design Unit, Eindhoven University of Technology

Abstract

This study aims to investigate and assess the analytical calculation methods which are applicable to glass parapets. Specifically it is focused on glass parapets, which are continuously clamped along their lower edge in an aluminium profile, without the addition of a (structural) handrail. The starting point of the research are the current codes of practice regarding glass parapets. The objectives are to investigate the limitations of the current methods, to develop new methods and to test whether these are applicable, taking into account the standards of several European countries. Codes and standards from the Netherlands, Belgium, the United Kingdom and Germany are analysed and applied to the calculation methods, to identify and analyse the differences. Subsequently, a series of static load tests have been performed to determine the spring stiffness of the aluminium parapet clamping profiles, such that they can be applied in new analytical calculation methods. The long-term value of this research is to present more accurate calculation methods which can be applied to continuously supported glass parapet, accounting for different parameters, such as the supporting effect of sealing rubbers and the application depth of fixation wedges. Finally, recommendations are made to improve common calculation methods.

How to Cite
BAIDJOE, Youri; VAN LANCKER, Bert; BELIS, Jan. Abstract of: Calculation methods of glass parapets in aluminium clamping profiles. Challenging Glass Conference Proceedings, [S.l.], v. 6, p. 572, may 2018. ISSN 2589-8019. Available at: <https://journals.library.tudelft.nl/index.php/cgc/article/view/2383>. Date accessed: 16 dec. 2018.
Published
2018-05-17